20 mm x 24,3 mm x 25 mm ISO SAL 20 plain bearings

Z:46.2 mm; s1:24.2 mm; A1:11 mm; B1:30.9 mm; C:12.8 kN; T min.:-20 °C; T max.:200 °C; Weight:0.49 kg; S:7.5 mm; J:90 mm;

A2:58.4 mm; B:55.6 mm; Designation of bearing:UC211-32G2T20; Designation of housing:FL211N-; T max.:200 °C; C:43.55 kN; d:50.8 mm; J:184 mm; A:43 mm; s1:27.8 mm;

B1:51.6 mm; T max.:100 °C; d:34.92 mm; N1:25 mm; H:56 mm; s1:36.55 mm; Designation of bearing:EX307-22G2T04; T min.:-40 °C; Recommended tightening torque for set screw:8 Nm; H2:106 mm;

SW:3 mm; T min.:-20 °C; B1:44.3 mm; Designation of bearing:EX205G2L4; B:34.8 mm; s1:30.9 mm; Weight:1.65 kg; C:14 kN; Designation of housing:SP203-205/52-; H:78 mm;

Bearing Locking Device:Tapered Adapter Slee; Grease Type:Unirex N2; Housing Type:Top Angle Take-Up; Bearing Family:Grip Tight Ball Bear; Shaft Attachment (2):Grip Tight; Ball Material:Steel; Ring Size:Standard; Housing Coating:Powder Coat; Bearing Duty:Normal Duty; Retainer Type:Std Retainer;

B:8 mm; Characteristic outer ring frequency, BPF0:3.07 Hz; Static load, C0:2.39 kN; Dynamic load, C:5.1 kN; D:28 mm; Min operating temperature, Tmin:-25 °C; Mass:0.02 kg; Fatigue limit load, Cu:0.11 kN; Nlim (grease):26,000 rpm; d:12 mm;

C0:11.2 kN; Designation of bearing:UC206-18G2L3; Designation of housing:PA206-; T max.:100 °C; E:18 mm; L:94 mm; G:M6x1; N:M14; J:66 mm; B:38.1 mm;

Housing Coating:Powder Coat; Brand:Baldor-Dodge; Grease Type:Unirex N2; Flinger Material:Steel; Manufacturing Plant Location:Rogersville, TN; Bearing Outer Ring Material:Steel; Ring Size:Standard; Housing Material:Cast Iron; Shaft Attachment (2):D-Lock; Bearing Inner Ring Material:Steel;

Dz:95 mm; T max.:200 °C; L1:90 mm; A:38 mm; H:181 mm; Designation of open end cover:SCOU209-28; B:41.2 mm; J1:72 mm; N:15mm; J:148 mm;

Housing Coating:Powder Coat; Bearing Family:Grip Tight Ball Bear; Anti-Rotation Pin:Yes; Brand:Baldor-Dodge; Ring Size:Standard; Flinger Material:Steel; Retainer Type:Std Retainer; Flinger Type:Rubberized; Max Bearing Speed:7500 rpm; Ball Bearing Housing Series:210 Series;

Weight:2.82 kg; N1:23 mm; A1:34 mm; Dz:100 mm; G:R1/8"; T max.:100 °C; J:158 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:PE210N-; C0:23.2 kN;

k:6 mm; Number of lubrication holes:3; Max operating temperature, Tmax:200 °C; Mass:16.9 kg; Nref:2,000 rpm; Min operating temperature, Tmin:-40 °C; Nlim:2,500 rpm; d:180 mm; B:74 mm; Fatigue limit load, Cu:113 kN;

Dz:120 mm; s1:32.55 mm; Recommended tightening torque for set screw:16.8 Nm; d:57.15 mm; B:65.1 mm; A5:39.7 mm; S:25.4 mm; Designation of bearing:UC212-36G2T04; Z:60.8 mm; T min.:-40 °C;

B:33 mm; d1:75 mm; D:100 mm; d:47.62 mm; C0:29.2 kN; B1:59 mm; T max.:100 °C; C:25 mm; Weight:1.2 kg; C1:7.2 mm;

Designation of housing:FC210-; A1:14 mm; N:16mm; T max.:100 °C; s1:25.8 mm; B:51.6 mm; C:35.1 kN; Designation of bearing:UC210G2L3; S:19 mm; Recommended tightening torque for set screw:22 Nm;