deep groove ball bearings

Deep groove ball bearings are the most widely used roller bearing type in the world due to their versatility and overall performance. They are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls. They also have non-separable rings. Their straight forward basic design has many advantanges:Excellent for high speedsGood radial load capacityAcceptable axial load capacity in both direction.Have low torque capacity at startup and running speeds.Can operate with low noise.Require little maintenance

As flexible as the performance is, the configurations of single row ball bearnigs is also as versatile. These bearings often have steel shields or rubber seals installed on one or both sides and are pre-lubricated with grease. Also, snap rings are sometimes used on the outside edge. While many different retainers are available, pressed steel cages are most commonly used. Even tapered bores are available upon special order.

Bearing Number	Bore Dia	Outer DIa	Width	Size
120 mm x 215 mm x 40 mm SKF 6224 deep groove ball bearings	Side Mount	Lubrication Fitting	Spherical Roller	79700 lbs
40,000 mm x 80,000 mm x 27,000 mm NTN 88508 deep groove ball bearings	0.4375 in	650 lb	.9060 in	Grease
300 mm x 460 mm x 74 mm KOYO 6060 deep groove ball bearings	3.2500 in	Uncoated	1.4212 in	575
110 mm x 140 mm x 16 mm NSK 6822VV deep groove ball bearings	1.1875 in	4410 lbf	3.2500 in	2540 lbf
300 mm x 540 mm x 85 mm NACHI 6260 deep groove ball bearings	1.9375 in	5-11/16 in	3.3125 in	4-1/2 in
150 mm x 270 mm x 45 mm CYSD 6230-RS deep groove ball bearings	0.6250 in	1000 lb	1.3440 in	Grease
45,000 mm x 85,000 mm x 19,000 mm NTN 6209LLBNR deep groove ball bearings	2.9375 in	3.3800 in	10.8300 in	Non-Expansion Bearing (Fixed)
25 mm x 47 mm x 12 mm CYSD 6005-RS deep groove ball bearings	0.1900 in	200 lb	.4690 in	Grease
160 mm x 220 mm x 28 mm NSK 6932 deep groove ball bearings	NSK	6932	1 pcs	Negotiable
70 mm x 125 mm x 24 mm KOYO 6214 deep groove ball bearings	Steel	±0.001 in	No Finish	±0.001 in
5 mm x 16 mm x 5 mm PFI 625-2RS C3 deep groove ball bearings	1.4375 in	7980 lbf	4.3750 in	5220 lbf
170,000 mm x 260,000 mm x 42,000 mm SNR 6034M deep groove ball bearings	1.4375 in	Cast Iron	Two-Bolt Base	Set Screw